W e l c o m e T o S c i e n c e   L i n k s   S i t e s)_9 Interaction Of The Universe To The Individual P R O M O T I N G   C O N S C I O U S N E S S    O N    T H E      I N T E R N E T

HYDROPONIC	NATIONAL DEFENCE	BUSINESS	PERPETUAL	SOLAR POWER	FAVORITES LINKS

 

Solar Water Heaters

Make This WebPage instantly available in other languages

 

Solar water heater relies on the natural circulation of water between the collector and the tank or heat exchanger.  In this type of installation, the tank must be located above the collector. As water in the vacuum tubes is heated it becomes lighter and naturally rises into the tank, Meanwhile, cooler water in the tank flows down to the bottom of the vacuum tubes, causing circulation throughout the system.

These systems move household water or a heat - transfer fluid through the system without pumps. This kind of passive systems have the advantage that electricity outage and electric pump breakdown are not issues. This makes passive systems generally more reliable, easier to maintain, and often inexpensive.

Ask for an Estimate

Features:

	Inner tank: Stainless steelSUS304 2B Thickness: 0.5 Cr:17.0019.00 % Ni: 8.0010.00 %
	Wide and thick galvanized steel sheet, ultra strong corrosion resistivity.
	Insulating layer: Foaming polyurethane Thickness 55 Thermal transfer rate 0.022W/m.k
	Sealing rubber: silicon rubber.
	Dustproof rubber: EPDM.
	Can collect solar energy efficiently by an inclination angle design.
	With galvanized steel sheet of triplet-function, it is suitable for the flat roof, also for the cuspidal roof, with good applicability and practicality.
	Highly efficient all glass vacuum tube.
	Cheap but reliable solution, Simple structure, Easy installation.
	Operation without any power supply.
	Could be installed using parallel and/or series connections
	Hot water can be used directly for, or can be used as a pre-heat.
	Unique "flower petal" end cover design, integrative with the barrel body, can be used years around under high temperature, no gap appears.
	Adopts importable polyurethane, uses automatic constant temperature high pressure bulk bubble technology, one-off molding, with excellent thermal properties.

 

Specifications:

Inner tank: esculent standard SUS 304-2B.
Heat preservation: 72h.
Number of tubes: 15/16/18/20/24/30
Size of the vacuum tube: φ58mm x 1,800mmVolume of tank: 90L ~ 300L
Bracket material: galvanized steel sheet
Angle of stand: 38° ~ 45°
Pressure: 0MPa
Hail resistance: 25mm

 

                             

Solar Water Heater

Atmospheric Drinking Water

Solar Air Condition

Ask for an Estimate 

Solar Lighting 
Residential & Commercial 

             

Make This WebPage instantly available in other languages

Interaction Of The Universe To The Individual
PROMOTING CONSCIOUSNESS ON THE INTERNET
Information provided in this site is deemed reliable but and should be independently verified.

trujillo2001@yahoo.com

HYDROPONIC	NATIONAL DEFENCE	BUSINESS	PERPETUAL	SOLAR POWER	FAVORITES LINKS